Sling Board

Suspended Comfort Platform

Finished Sling Board

Materials Needed

  • 1x 2' x 4' x 3/4" A/B grade plywood (precut)
  • 4x eyebolts with washers
  • Marine grade vinyl (Joann's Fabrics)
  • 2x 3" seat foam cushions
  • Batting material
  • Staple gun
  • Spray paint (optional)

Assembly Instructions

  1. 1 Mark and drill holes for eyebolts at each corner of the plywood, 2" from edges
  2. 2 Install eyebolts with washers on both sides for reinforcement
  3. 3 Cut foam cushions to fit the board dimensions (24" x 48")
  4. 4 Layer batting over foam, then cover with marine vinyl
  5. 5 Secure vinyl to underside of board using staple gun
  6. 6 Optionally spray paint exposed wood edges for finished look

Safety Note

Ensure all hardware is rated for the user's weight. Test suspension before full use.

Designed for suspended upper body support with independent leg support